ORTLIEB Fork-Pack Plus - 5.8L - black

Fast, faster, Fork-Pack Plus with Quick-Lock S adapter system

The ultra-light bag with roll closure can be mounted with the help of the QLS adapter both on forks with designated screw mounts, as well as on forks without special screw mounts, the tubes must have a constant diameter of 30mm to 42mm for this.
The Fork-Pack Plus can be easily and quickly attached and removed from the mounted adapter plate with one hand in a matter of seconds. The PVC-free bag is made of abrasion-resistant Cordura fabric and is, of course, sustainably manufactured in Germany.

Features of the ORTLIEB Fork Pack Plus 5.8L - fork bag

• The Fork-Pack is primarily designed to be attached to the bike fork, but can be mounted on all vertical tubes, e.g. scooters
• Abrasion-resistant, PU-coated Cordura fabric
• Allows additional luggage to be carried on bikes without racks, using the Quick-Lock S (QLS) adapter system
• Adapter is compatible with forks with screw fixation and tubes with constant diameter from 30 mm to 42 mm
• Either by direct mounting (thread in the tube) or by means of two metal straps (included) the minimalist mount is securely mounted
• With one click, the bag snaps into place in a flash and can be removed again just as easily
• For quick removal, simply move the release lever at the top of the bag to the side and pull the bag upwards
• The robust Quick-Lock S adapter stays on the bike
• Flat locking elements ensure a smooth back of the bag
• Internal reinforcement
• Reflective ORTLIEB logo

Quick-Lock S adapter system

The Quick-Lock adapter system makes attaching bags to the bike fork simple, easy and flexible. The innovative Quick-Lock S system is ideal for attaching bags like the Fork-Pack or Fork-Pack Plus to the fork of a bike. The easy and fast mounting and removal of bags can be done with one hand in seconds. The QLS can be mounted on forks with dedicated screw mounts as well as on forks without special screw mounts.

Warnings and safety information

• Risk of injury due to incorrectly attached products! Before riding, check that the product is securely fastened.
• Risk of injury from sharp edges! Use the enclosed shrink tubing and round off the edges at the ends, if the steel bands have been shortened to minimize the danger.
• Risk of injury due to loosening parts and material fatigue! Refrain from jumping with the bike while the product is mounted on it.
• Risk of injury due to loose components on the product. Screws can loosen over time due to vibrations. Therefore, check the screws after 10 km, 50 km, 100 km and 200 km and retighten if necessary.
• Risk of injury due to material breakage if overloaded! Do not exceed the maximum payload of 3 kg. If necessary, weigh your load to ensure that you do not exceed the maximum payload.
• Risk of injury if used with non-compatible forks! The product cannot be used with forks without bolt-on points that have tapered tubes or tubes made of carbon.