ORTLIEB Back-Roller Urban Single - QL3.1 Bike Pannier - 20L - pepper

The multifunctional Urban Back-Roller is the ideal single bag for cyclists looking for a spacious, waterproof bike bag for their commute to work or school. Made from a special Cordura blend, the bag has a fabric-like appearance that pairs well with both leisure and business attire. Thanks to a polyurethane coating on the inside, it’s still completely waterproof. With the practical QL mounting system, you can quickly and easily attach the bag to your bike rack. The bag’s interior, consisting of a main compartment and a zipper-closed mesh pocket, helps you stay organized and have everything within easy reach. A removable shoulder strap allows you to carry the urban Back-Roller comfortably when you’re on foot.

Features of the ORTLIEB Back-Roller urban Single - QL3.1 Bike Bag - 20L:

• Classic bike pannier rear (single bag) with roll-top closure
• With Quick-Lock 3.1 mounting system
• QL3.1 mounting kit (not included) as an optional accessory for carriers not pre-equipped with QL3.1
• Ideal for commuting to work, college, or school
• Mounting components attach to the carrier
• Standard mounting possible for tube diameters up to 10 mm
• Durable, PU-coated Cordura blend fabric with a comfortable feel
• Attach and remove the bag with just one hand
• Flat locking elements ensure a smooth bag back
• The bag’s height and angle are individually adjustable
• The lower mounting hook of the installation kit is rotatable
• Inner pocket
• Easy to clean inside
• Removable shoulder strap
• High-intensity reflectors made of “3M Scotchlite reflective material”
• Note: Toachieve IP64 protection (6 = dustproof, 4 = protected against water splashes from all directions), the closure must be rolled up 3–4 times and secured downward.

Quick-Lock 3.1
This bag features the Quick-Lock 3.1 mounting system; the snap-on buttons required for mounting on carriers with QL3.1-compatible mounting points are included in the scope of delivery. If you want to use the bag on a carrier without an integrated QL3.1 mount, you’ll also need a QL3.1 mounting kit. The mounting kit weighs just 140 g and is securely mounted to the carrier.

scope of delivery:

• QL3.1 single bag with shoulder strap
• QL3.1 snap buttons

Warnings and Safety Instructions:

• Risk of injury from improperly attached products! Check before riding to make sure the product is securely fastened.
• Risk of injury due to loose shoulder straps! Tighten the shoulder straps before every ride or stow them inside the product.
• Risk of injury from components on the product coming loose. Screws can loosen over time due to vibrations. Therefore, check the screws after 100 km, 500 km, 1,000 km, and 1,500 km and tighten them if necessary.
• Risk of injury due to material failure from overloading! Do not exceed the maximum load capacity of 9 kg. If necessary, weigh the load to ensure that the maximum load capacity is not exceeded.