Discover Magura Gustav Pro disc brakes at BIKE24
The Magura Gustav Pro gives your e-MTB or gravity bike extra braking reserves when descents get longer and braking gets harder. Magura puts this hydraulic 4-piston brake in its Extreme Duty class, designed for demanding use on heavy e-MTBs and in the bike park. A defined bite point helps you brake hard before a berm or fine-tune your speed on loose ground. Thick 13.S pads provide plenty of wear reserve, while optional 2.5 mm rotors increase heat resistance on long descents. It gives you the braking reserves you need for demanding enduro rides and repeated park runs.
Why choose the Magura Gustav Pro
The Magura Gustav Pro is made for hard braking on e-MTB descents and repeated bike park runs. Find the brake and matching components at BIKE24.
- Consistent under load: Large pistons and compatibility with 2.5 mm rotors help manage heat.
- Precise modulation: Low system pressure delivers a clearly defined bite point.
- Workshop-free servicing: EASY LINK disconnects the hose from the lever without special tools.
Magura Gustav Pro brake and rotors
The Magura Gustav Pro comes as a pre-bled individual brake with a 2,200 mm hose. When upgrading, you can keep approved 2.0 mm rotors. For greater thermal reserves on long descents, choose the 2.5 mm MDR-S 2.5 rotor. The 6-bolt rotor comes in 180 and 203 mm sizes. Always check frame and fork compatibility when choosing a size.
Magura Gustav Pro technologies
Magura pairs a one-piece forged aluminum caliper with a compact Carbotecture brake lever on the Gustav Pro. It houses the master piston, a reservoir with a 7 ml oil capacity and the EASY LINK connection – keeping the system compact at the handlebar.
19 mm pistons on the Magura Gustav Pro
Four 19 mm pistons in the caliper work with a radial 12 mm master piston in the lever. This setup reduces system pressure, so less lever travel is lost as the brake hose expands under pressure. That gives you a defined bite point and precise control over your braking power.
EASY LINK – plug-in connection at the brake lever
EASY LINK connects the hose and brake lever with a plug-in connection. You can disconnect and reconnect it without special tools – making jobs such as replacing the headset easier with internally routed hoses. Disconnecting it opens the hydraulic system. Whether you need to bleed the brake afterward depends on the work performed and the condition of the brake.
EASY BLEED – easier brake bleeding
EASY BLEED simplifies bleeding, with a valve on the caliper and a continuous oil channel with no dead ends. This design helps move air bubbles out of the system during bleeding. The system runs on Magura Royal Blood, so regular brake fluid changes aren't necessary.
Order the Magura Gustav Pro at BIKE24
Get your bike ready for the next park day with braking power built for long descents and repeated runs. At BIKE24, you'll find the Magura Gustav Pro along with matching rotors and components. Upgrade your brakes now and get your Gustav Pro delivered fast for your next ride.